8 selectable blink sequences - Click HERE to see them!
-
10 selectable speeds from 70ms to 340ms in 30ms increments
-
Special 'sequence 9' mode which will cycle to the next sequence after each time the turn signal is used
-
Special 'sequence 10' or demo mode which will cycle thru all sequences one after another, as long as the turn signal is on
-
High current MOSFET technology means full lamp brightness
-
Microcontroller based for future upgrades or custom blink sequences
-
Fits in original sequencer housing after removing old switch board - can be returned to original, just keep your parts
-
2 pushbuttons control sequence and speed. EEPROM stores and remembers last settings
-
On board LED's indicate blink pattern, sequence number and speed setting
-
Comes with a flat 4 connector and ground wire - no wire cutting or splicing, Plug & Play
-
Click HERE for installation instructions
-
10 selectable speeds from 70ms to 340ms in 30ms increments
-
Special 'sequence 9' mode which will cycle to the next sequence after each time the turn signal is used
-
Special 'sequence 10' or demo mode which will cycle thru all sequences one after another, as long as the turn signal is on
-
High current MOSFET technology means full lamp brightness
-
Microcontroller based for future upgrades or custom blink sequences
-
Fits in original sequencer housing after removing old switch board - can be returned to original, just keep your parts
-
2 pushbuttons control sequence and speed. EEPROM stores and remembers last settings
-
On board LED's indicate blink pattern, sequence number and speed setting
-
Comes with a flat 4 connector and ground wire - no wire cutting or splicing, Plug & Play
-
Click HERE for installation instructions
